No fingerprint glass is glass covered with sand firstly, go on spray and take the finished product with prepared liquid promptly and then. The working technique is steady, convenient, easy to master, the yield is high, the glass products surface dealt with is fine and smooth and soft, there is not hand sweat stain that is printed, it is difficult to scratch.

Preparation and maintenance method of the liquid medicine

1. Prepare the liquid and press water: liquid =Diluting and using at 1:1, the newly fit liquid can be used for some time, when finding (compare with the standard sample) the transparency of the liquid glass drops; can consider adding the liquid.

2. The liquid generally according to polishing glass 50m2/15kgs proportion of liquid (half barrel) is it uses as medicine in water getting rough to add directly (no need to prepare the running water).

3. The glass will be smooth surface time in 3-5minutes/each time; want observation post smooth surface transparency of glass unanimous at any time, up to the reducing of the density, proper extension time.

4. The tank is used some time later (about one month), there is a large amount of white powder in the case bottom, residue, should all remove, the quality so as not to stop up the pipeline and influencing the glass surface. If it is not enough liquid, can press the liquid: Water =the proportion of 1:1 mixes and joins the tank, in order to increase the height the liquid.

5. After adding the liquid, it needs to turn on the reproduction of 10 minutes of pump circulation.

6. Blasting sand glass (breaks the sand), need bright finish twice.