Overview
Testing Report
Introduction
This is a testing report of monolithic fire resistant glass according to Class C of Chinese National Standard GB15763.1-2001.
General
Product Name | Monolithic Fire Resistant glass |
Sign | DFB-10-CII |
Consigner | National Fire Inspection Bureau |
Consignee | Xinology Co., Ltd. |
Sample Selected By | National Fire Inspection Bureau |
Sample Selected At | Warehouse |
Sample Selected On | May 16th, 2006 |
Sample Delivered On | May 16th, 2006 |
Quantity Of Sample | 1 set |
Sample Reference Number | 2006-1235 |
Inspection Type | General Inspection |
Inspection Standard | GB15763. 1-2001 |
Samples Classification | Applied level: Grade II of Class C |
Inspected Item | All Items |
Inspection Place | Inspection Center |
Inspection Conclusion | Samples are monolithic fire resistant glass and are tested according to GB15763.1-2001 < Safety & Fire Resistant Glass For Architecture >. Fire Resistant time is 76 min. |
Summary
Item | Inspected Item Name | Standard require and clause number | Results | Conclusion | |
1 | Original Glass | It can use normal flat glass, float glass, tempered glass etc material as original glass, and it is respective according with GB4871, GB11614, GB/T9963 etc relevant standard and clause rule in this criterion. | Meet standard required | Qualified | |
2 | Size And Thickness Tolerance | Length or width: 1000mm < L ≤ 2000mm Thickness: 10mm Allowable length tolerance: ± 3mm Allowable width tolerance: ± 3mm Allowable thickness tolerance: ± 0.3mm |
Length:1100mm Width: 600mm Thickness:10mm Length tolerance: 0mm Width tolerance: 0mm Thickness tolerance: 0.0mm |
Qualified | |
3 | Appearance Quality | Break Edge | Inexistence | Inexistence | Qualified |
Scratch | Width: ≤ 0.1mm and length ≤ 50mm lightly scratch, each square meter is less than 4 scratches | No scratch | Qualified | ||
0.5mm > width > 0.1mm and length ≤ 50mm lightly scratch, each square meter is not more than 1 scratch | No scratch | Qualified | |||
Calculi, Crackle, Unfilled Corner | Not allowed | Inexistence | Qualified | ||
Glass Drag And Bubble | Meet or better than those request specified in GB11614 architecture grade rule | Meet standard | Qualified | ||
4 | Degree Of Curve | Glass degree of curve in fireproof is not more than 0.3%. | 0.00% | Qualified | |
5 | Mechanical Property | After impact test, glass should not broken | Glass unbroken | Qualified | |
The fragment of each 50 x 50mm sample should be more than 40 pieces; fragment crossing the borderline is counted as half piece. Allowing few oblong fragments exist, but the length should be less than 75mm, and two ends should not be shape; the inclined angle of rectangle fragment extending to the edge of glass should not be more than 450. | 1# sample: fragment 59 piece, no rectangle fragment; 2# sample: fragment 61 piece, no rectangle fragment; 3# sample: fragment 61 piece, no rectangle fragment; 4# sample: fragment 60 piece, no rectangle fragment; |
Qualified | |||
6 | Fireproof Characteristic | Grade II: fireproof time ≥ 60 min | When fireproof test go on at 76 min, unexposed surface appear lasting more than 10 s flames; lose fireproof integrality. Fireproof time is 76min. | Qualified |